Ductile Iron Casting Parts for Rolling Mills Introduction
Ductile iron is an iron-carbon alloy with a carbon content of more than 2% of pig iron, and contains various elements such as C, SI, Mn, S, and P. In comparison, the ductile iron castings have a smaller splitting effect on the metal matrix than the flake graphite, which makes the strength of the cast iron 70-90% of the strength of the matrix structure, the tensile strength is also very high, and has good toughness.
By controlling the heat treatment process. A variety of matrix structures are available, with ferrite and pearlite being the most common. Ductile iron castings have high strength and certain plasticity.
It has a good combination of good cutting, plasticity, high strength and good casting properties. Make ductile iron castings a fairly satisfactory engineering material.
Cone cast iron has replaced gray cast iron, malleable cast iron, cast steel and even forged steel in many occasions. The ductile iron castings produced in China are mainly used in the manufacturing of the well pipe industry, such as ductile iron castings.
It can make the tensile strength very strong. In addition to the high-strength tensile properties, the ductile iron castings with very good toughness have reached the world advanced level.
1.Q: Where is your factory located?
A: Our factory address is :Zhongyao, Xishan district, Wuxi, Jiangsu, P.R.China
2.Q: As the shipping period will take long time, how can you make sure the machine won’t be broken?
A: Our machine is film wrapped, to make sure the machine can be delivered to our customer smoothly, we will use the steel wire to fix the machine with the container.
3.Q: After we placing an order, will you arrange the installation of the machine at present?
A: All the machines will be tested well before delivered, so almost of them can be used directly, also our machine are easy to be installed, if you customer needs our assistance, we will be pleased to arrange the installation, but all the cost will be be charged by you.