Continuous Cast Iron Bar Introduction
The Chute Linings capacity of our company is 30,000MT/year and the single piece is from 15kg to 20tons. The capacities of Mid-frequency induction electric furnaces are 15tons,12tons, 5tons,2tons, 1.5tons and 1.2tons. And we have 10 sets of heat-treatment electrical furnaces with capacity of 30 tons, 10 tons,3 tons.
The super wear resistant liner of hopper has the characteristics of super abrasion resistance ratio and high impact resistance ratio.
Place of Origin: Jiangsu, China (Mainland)
Brand Name: Chen's Liner
Model Number: DF642
Application: mining industry
Hardness: More than HRC58
Material Grade: KmTBCr18
Product name: High Cr Cast Iron Chute Liners for Grinding Mill
(1) Low mechanical properties. The tensile strength of gray cast iron is relatively low. This phenomenon is inseparable from the microstructure characteristics of gray cast iron. Because the mechanical properties of graphite are very low, the microstructure of gray cast iron is actually equivalent to filling holes or Cracked steel. At the time of stretching, the tensile strength value is much lower than that of steel due to the segmentation effect of flake graphite on the steel matrix and the stress concentration effect caused.
(2) Excellent wear resistance and shock absorption. Since the graphite in the cast iron is advantageous for lubrication and oil storage, the wear resistance is good. Similarly, due to the presence of graphite, grey cast iron is superior to steel in shock absorption.
(3) Good process performance. Since gray cast iron has a high carbon content and is close to the eutectic composition, the melting point is lower than that of steel, and thus the casting fluidity is good. In addition, since graphite makes it easy to form chip breaking during cutting, the machinability of gray cast iron is superior to that of steel.
1. Production of qualified wear and heat castings;
2. Design and installation of the boltless mill liners;
3. Consulting service of material selection of the mill liners under specific working condition to achieve longer
4. Consulting service of production & fineness improvement of grinding mills.
5. We can provide OEM/ODM for our clients.
Packaging & Delivery
Packed by strong steel pallets;
The load of each pallet is less than 2500kg;
The castings will be loaded in 20 feet container.
It depends on the quantity to be ordered
1.Q: Where is your factory located?
A: Our factory address is :Zhongyao, Xishan district, Wuxi, Jiangsu, P.R.China
2.Q: As the shipping period will take long time, how can you make sure the machine won’t be broken?
A: Our machine is film wrapped, to make sure the machine can be delivered to our customer smoothly, we will use the steel wire to fix the machine with the container.
3.Q: After we placing an order, will you arrange the installation of the machine at present?
A: All the machines will be tested well before delivered, so almost of them can be used directly, also our machine are easy to be installed, if you customer needs our assistance, we will be pleased to arrange the installation, but all the cost will be be charged by you.