Super Abrasion resistant White Iron High Cr Casting Introduction
The material in the fine grinding bin is mainly grinding, the lining board lifting capacity can be smaller, and even hope that there is a certain relative sliding between the ball and liner, in order to enhance the grinding and friction of the material. Therefore, flat liner is widely used in fine grinding bin
1. Production of qualified wear and heat castings;
2. Design and installation of the boltless mill liners;
3. Consulting service of material selection of the mill liners under specific working condition to achieve longer
4. Consulting service of production & fineness improvement of grinding mills.
5. We can provide OEM/ODM for our clients.
Packaging & Delivery
Packed by strong steel pallets;
The load of each pallet is less than 2500kg;
The castings will be loaded in 20 feet container.
It depends on the quantity to be ordered
1.Q: Where is your factory located?
A: Our factory address is :Zhongyao, Xishan district, Wuxi, Jiangsu, P.R.China
2.Q: As the shipping period will take long time, how can you make sure the machine won’t be broken?
A: Our machine is film wrapped, to make sure the machine can be delivered to our customer smoothly, we will use the steel wire to fix the machine with the container.
3.Q: After we placing an order, will you arrange the installation of the machine at present?
A: All the machines will be tested well before delivered, so almost of them can be used directly, also our machine are easy to be installed, if you customer needs our assistance, we will be pleased to arrange the installation, but all the cost will be be charged by you.