High Cr Casting White Iron Thick Wear Plates Introduction
High manganese steel is divided into 5 grades according to the national standard ，The main difference is carbon content, which ranges from 0.75%-1.45%. High impact, low carbon content. The commonly used high manganese steel grades and its applicable scope is: ZGMn13 1 (C 1.10% to 1.50%) for low impact, ZGMn13 - 2 (C1.00% - 1.40%) for common parts, ZGMn13 - 3 (C0.90% - 1.30%) for complex parts, ZGMn13-4 (C0.90%~1.20%) for a high impact. The manganese content of the above 4 grades of steel is 11% - 14%. Manganese content between 11.0%-14.0%, generally should not be less than 13%. There is no national standard for ultra high manganese steel, but manganese content should be greater than 18%.
Product details
Place of Origin: Jiangsu, China (Mainland)
Brand Name: Chen's Liner
Model Number: DF642
Application: mining industry
Material: Iron
Dimensions: 320/580
Hardness: More than HRC58
Material Grade: KmTBCr18
Product name: High Cr Cast Iron Chute Liners for Grinding Mill
FAQ
1.Q: Where is your factory located?
A: Our factory address is :Zhongyao, Xishan district, Wuxi, Jiangsu, P.R.China
2.Q: As the shipping period will take long time, how can you make sure the machine won’t be broken?
A: Our machine is film wrapped, to make sure the machine can be delivered to our customer smoothly, we will use the steel wire to fix the machine with the container.
3.Q: After we placing an order, will you arrange the installation of the machine at present?
A: All the machines will be tested well before delivered, so almost of them can be used directly, also our machine are easy to be installed, if you customer needs our assistance, we will be pleased to arrange the installation, but all the cost will be be charged by you.
