Cr Mo Alloy Steel Lifter Bar Castings Introduction
The chemical composition of the alloy layer has a carbon content of 4 to 5%, a chromium content of 25 to 30%, a volume fraction of Cr7C3 carbide in the metallographic structure of 50% or more, a macrohardness of HRC of 56 to 62, and a hardness of chromium carbide of HV1400~1800, higher than the hardness of quartz in sandstone HV800~1200. Since the carbide is vertically distributed in the wear direction, the wear resistance is more than doubled even when compared with the cast alloy of the same composition and hardness.
Place of Origin: Jiangsu, China (Mainland)
Brand Name: Chen's Liner
Model Number: DF642
Application: mining industry
Hardness: More than HRC58
Material Grade: KmTBCr18
Product name: High Cr Cast Iron Chute Liners for Grinding Mill
Packaging & Delivery
Packed by strong steel pallets;
The load of each pallet is less than 2500kg;
The castings will be loaded in 20 feet container.
It depends on the quantity to be ordered
1.Q: Where is your factory located?
A: Our factory address is :Zhongyao, Xishan district, Wuxi, Jiangsu, P.R.China
2.Q: As the shipping period will take long time, how can you make sure the machine won’t be broken?
A: Our machine is film wrapped, to make sure the machine can be delivered to our customer smoothly, we will use the steel wire to fix the machine with the container.
3.Q: After we placing an order, will you arrange the installation of the machine at present?
A: All the machines will be tested well before delivered, so almost of them can be used directly, also our machine are easy to be installed, if you customer needs our assistance, we will be pleased to arrange the installation, but all the cost will be be charged by you.