Physical properties and weight requirements of wear - resistant castings

- Aug 15, 2019-

Liquid moulds are almost unlimited in size, ranging in weight from a few grams to several hundred tons, and their wall thickness can range from 0.5mm to about 1m.Any metal material that can be dissolved into liquid form can be used in liquid forming.For cast iron with poor plasticity, liquid forming is the method of producing its blank or part. 

The cost of liquid forming parts of wear - resistant castings is lowSmall chip, equipment cost is low.At the same time, liquid parts processing margin is small, saving metal. 

Wear-resistant casting has excellent mechanical and physical properties, which can be combined with various strengths, hardness and toughness, and can also have one or more special properties, such as wear resistance, high temperature and low temperature resistance, corrosion resistance and so on. 

Casting weight and size range is very wide, the weight is only a few grams, the weight can reach 400 tons, the wall thickness is only 0.5 mm, the thickness can be more than 1 meter, the length can be from a few millimeters to a few meters, can meet the requirements of different industrial sectors.

https://www.wuxiorient.com/