Operating procedure and connecting device of mine mill

- Mar 06, 2019-

According to the different productivity of the system, the mine mill is equipped with different sizes of grinding balls in operation. Generally, there are 5 grinding balls in the mill.The pressure ring is used to fix the upper grinding ring. The pressure ring can move freely vertically in the body, which can prevent the foreign body from clogging and damaging the grinding element.The grinding yoke is the connecting piece of the lower grinding ring and the driving device.The center of the grinding machine has an access door.In addition, the grinding machine is also equipped with hydraulic oil supply system and gear box oil supply system.Vertical grinding machine barrel body is a closed unit, in this unit can be simultaneously grinding, separation and transport, grinding machine for continuous operation.

Operating rules for mine mills

1. The operators and apprentices of the mine mill must pass technical safety education and practical assessment before they can operate independently.Non-process personnel without the consent of the leader, not allowed to use.

2. Before work, the machine must be checked to see whether the machine is running normally. If any fault is found, it shall be repaired in time before operation.

3. After the machine is started, fingers are strictly prohibited to contact the external and internal gears to prevent safety accidents.

4. When the work is finished, the power must be turned off and cleaned. Keep it clean frequently.www.wuxiorient.com